XPS-PRO Insulating boards 50 mm

XPS-PRO Insulating boards 50 mm

Brand: PROWARMᵀᴹ
Product Code: XPS50
Availability: In Stock

Ask a question about this product

 ProWarm™ XPS PRO is an insulation material designed and manufactured specifically for use beneath under-tile mat kits .

  • High compressive strength 30 tonnes per m²
  • Designed for poorly insulated  concrete / screed base
  • Extremely light weight
  • Cost effective ( cheaper than tile backer board )
  • 1 board covers 0.72m²

These boards are fully approved by ULTRA tiles and are manufactured in the UK by Image result for dow chemical

Note :Boards must be bonded to a clean,dry surface using a cement based Flexible Rapid Set tile adhesive.

Use Tile Backer Board in wet areas.


 Technical Data Styrofoam LBH-X Technical Specification

  • 50mm Board Quantity

    Price Per Board

    1 to 20 £15.50
    21 to 40 £14.50
    Over 40 £13.75
  • ProWarm™ XPS Premium Boards can be installed differently according to the type of heating system being installed.

    For our under-wood heating system they are simply laid in a staggered brick bond pattern and the heating mat is laid over the top.

  • For under-tile systems (these boards are only suitable for concrete sub-floors in this situation) then the boards need to be stuck to the sub-floor with a suitable flexible tile adhesive.      

Write a review

Note: HTML is not translated!
    Bad           Good
Recently viewed
Wetroom World UK © 2017