Walls and floors of showers and wetrooms need to be properly tanked to prevent damage to tiling backgrounds and substrates.This kit gives you all you need to make them fully waterproof.
Waterproofs up to 4.5m²
■ BAL PRIME APD: 500ml
■ BAL WP1 POLYESTER TAPE (100mm): 10 metres
■ BAL WP1 POLYESTER MATTING: approx. 1m²
■ BAL WP1 WATERPROOF COATING: 4.5kg
BAL WP1 Waterproofing Kit is a flexible, seamless, and complete waterproof tanking system. It includes an acrylic based flexible WP1 Tanking Coating, WP1 Polyester Tape, WP1 Polyester Matting, and APD Acrylic Primer.
The BAL WP1 Waterproofing Kit provides complete waterproof protection of substrates prior to fixing wall and floor tiles in wet or dry interior environments.
Key features and benefits include:
Setting Time: 3 hours
Drying Time: 24 hours
Suitability: Suitable for use on concrete, brick and block work, partition walls, timber floors, plaster, plasterboard, plywood, glazed tiles, cement, plywood overlays, and suspended floors
Can be used on areas where movement may occur such as drainage channels and junctions between walls and floors
Recommendations for BAL WP1 Waterproofing Kit
The BAL WP1 Waterproofing Kit is recommended for use in showers, bathrooms, kitchens, laundry and utility rooms, upstands, pipes, and floor wastes.